No products in the cart.
Roll over image to zoom in
Bấm để mở chế độ xem rộng
COMBO FPV 600MW
COMBO FPV 600MW
he monitor and receiver can use only one 3S lipo battery.
And the tranmsitter can use the 3S lipo battery from the drone.
No blue when lose signal (it is very important for FPV)
Screen size : 7.0 inch
Resolution : 800(W) x 480(H)
Brightness :500 cd
Contrast Ratio :350:1
Input voltage:DC 9-15V
Working temperature:0 – 65
1.With 7-inch 800 * 480 high-definition digital screen, brightness 500CD
2.About the detected video signal display time 0.5S (when the receiver signal bad that snowflake display, the signal completely disconnect that blue screen again detected signal that display immediately, there is no delay)
3.Voltage Range: 7-35V (recommended 3S battery-powered)
4.Supports two-way AV signal display, (AV1 and AV2,AV1 can be used to connect receivers, AV2 connected DVR, AV1 do enjoy watching the picture,AV2 used surveillance DVR working state, the screen of a key switch AV1 / 1V2)
5.Screen comes with sun shade, easy to carry
6.Comes with audio function
This set includes a TS832 transmitter and RC832 receiver, it can transmit and receive high quality video without voice and picture signals.
Can be connected to Video devices like CCTV camera, DVD player, Video camera, etc.
Wireless transmission distance up to 2000-6000 meters without any obstacles and interfering signal( Actual transmission distance depends on specific environment).
Digital phase-locked loop circuit, no channel drift issues.
Receiver with two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching.
Digital display: for CH and FR, real-time positioning which frequency band and which channel received.
Transmission distance: 2000 meters(without any obstacles and interfering signal)
Signals transmitted/Receiver: Video and audio
A/V Frequency: 5.8GHz
Available Channel: 40CH
Power supply: DC 12V
Consumption Current: 200mA, Max.
Antenna Input Impedance: 50ohm Typ.
Antenna Connector: SMA
Antenna Gain: 2dBi
Video Output Level: 1.0Vp-p Typ 75?
Audio Output Level: 1.0Vp-p Typ 10K?
Audio Carrier: 6.5MHz
Receiver size: 8.8 * 6.5 * 1.8cm / 3.5 * 2.6 * 0.7in
Receiver weight: 85g / 2.9oz
Antenna connection: SMA connector
Output impedance: 50dhm
Output power: 27.5dbm (typ.)
Power input: 7.0-16V
Working current: 220mA at 12V
Video bandwidth: 8Mhz
Video input level: 0.8~1.2Vp-p
Video input impedance: 75ohm
Audio input level: 0.5~2.0Vp-p
Audio input impedance: 10K/Ohm
Transmitter size: 6.4 * 3.3 * 1.0cm / 2.5 * 1.3 * 0.4in
Transmitter weight: 22g / 0.7oz